Hanns.G HS233 User Manual download pdf (Page 9)

User’s Manual

SETTING THE MONITOR ON THE WALL

DISSEMBLING THE STAND BASE:

1. Disconnect all the cables and cords from the Monitor to prevent damage.

2. Carefully place the monitor face down on a soft and flat surface (blanket, foam, cloth, etc) to

prevent any damage to the monitor.

3. Press the release button as indicated, follow the arrow direction to remove the base.

4. Remove the three (3) screws so that the stand cover can be removed.

5. Remove the three (3) screws so that the hinge assembly can be removed.

(For reference only)

WALL MOUNTING THE MONITOR:

1. Purchase a VESA compatible wall bracket:

VESA 100x100, 4 holes, M4, 10 mm, 8 kg.

2. Locate your ideal Monitor position on the wall.

3. Fix the wall bracket firmly on the wall.

4. Secure the Monitor to the bracket using the 4 mount holes

on the back and center of the Monitor.

Note:

 Please read the instructions of your specific wall bracket to properly wall mount the Monitor.

 The pitch of the mounting holes is 100 mm horizontally and 100 mm vertically.

 The screws type required is metric: M4, 10 mm length.

 The Monitor stand base can be screwed on a table or a hard surface using the hole on the back of

the stand base.

*Installing the LCD Monitor requires special skill that should only be performed by qualified service

personnel. Customers should not attempt to do the work themselves. Hanns.G bears no responsibility

for improper mounting or mounting that results in accident or injury. You can ask qualified service

personnel about using an optional bracket to mount the Monitor to the wall.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 20 21

No comments

Hanns.G HS233 User Manual Page 9